image

sleevings -UL/SGS/KEMA/ROSH

More sleevings
Teflon Sleeving / PTFE Teflon Heat Shrink /FEP,PVDF,PFA,FEP,XR-H PE,shrinkSleeving/Silicone Fiber Glass Braid Sleeving/Teflon Bellows etcs .Its use on electronic ,power,domestic ,computer, motorcycle, shipbuilding, aviation, communication, war industry medical treatment a, energy conservation and 100% Custom Fabrication.Fast Delivery from Xinrui Electrical Co,.ltd.. hot on line +86 13372140693

PVDF Polyvinylidene Fluoride Heat Shrinkable Casing

Poly (vinylidene fluoride heat shrinkable tubing irradiating crosslinking of high performance transparent flame retardant special polymers heat shrinkable tube, can have UL certification, the distinction between recognition is mainly used in the cable or components?the insulation of the connection welds and stress relief, protection of cable or coating components from chemical corrosion or mechanical damage.


Product features

 

  1. Low shrinkage ratio 2:1
  2. Low transparency, high flame retardant
  3. Good toughness, excellent physical properties and chemical corrosion resistance
  4. "Do not contain chlorine PCBS, POPS and polybrominated biphenyl PBBS, polybrominated diphenyl oxide PBBOS, polybrominated diphenyl ether PBBES, PBDES harmful to the environment Material, in line with the European RoHS environmental directives and SONY SS00259 standard requirements of environmental protection.
    Temperature range
    Continuous using low temperature:-55'C#v200'C Low minimum initial shrinkage temperature: 155*C Low minimum completely shrink temperature: 175QC
    Certification/up to the standard
    UL224 VW-1

    特性
    Features

    项目
    Project

    指标要求 Index requirements

    测试方法 The test method

    典型值
    Typical values

     

     Tensile strength

    17.3MPa min.

    ASTMD638

    >25MPa

     

     Elongation at break

    1500% min

    ASTMD638

    >300%

     Physical properties

    Thermal shockf 275*C,4hours)

    No cracks

    ASTMD2671

     Through

     Low lender soft(55*C,4hours)

    No cracks

    ASTMD2671

    Through

     

     Thermal aging 158扖,彳68 hours

     

     Elongation at break after aging

    100% min.

    ASTMD638

    >100%

     

     High voltage and breakdown

    2500v, 60SEC,no breakdown

    ASTMD2671

     Through

    Electrical characteristics

    Volume resistivity

    1014Q ■ cm min.

    ASTMD876

    >1014^2 ?cm

     

    Corrosive

     No corrosion

    ASTMD2671

     Through

    Chemical characteristics

     Flame retardant

    Vw-1

    UI224

     Through


    规格

    Inside diameter(mm/inch)
    Before the contract After contracting

     Wall thickness
    (mm/inch)
    After the contract

     Packaging (m/roll)

    3/64

    1.2(0.046)

    0.6(0.023)

    0.25士0.05(0.010 土 0.002)

    1.2

    1/16

    1.6(0.063)

    0.8(0.031)

    0.25?.05(0.010 士 0.002)

    1.2

    3/32

    2.4(0.093)

    1.2(0,046)

    0.25 士 0.05(0.010?.002>

    1.2

    1/8

    3.2(0.125)

    1.6(0.063)

    0.25 土 0.05(0.010 土 0.002)

    1.2

    3/16

    4.8(0.187)

    2.4(0.093)

    0.25?.05(0.010?.002>

    1.2

    1/4

    6.4(0.250)

    3.2(0.125)

    0.30?.08(0.012 土 0.003)

    1.2

    5/16

    7.9(0.3125)

    4.0(0.15748)

    0.30 士 0.08(0.012 土 0.003)

    1.2

    3/8

    9.5(0.375)

    4.8(0.187)

    0.30士0.08(0.012 土 0.003)

    1.2

    1/2

    12.7(0.500)

    6.4(0.250)

    0.30 士 0.08(0.012 士 0.003)

    1.2

    3/4

    19.1(0.750)

    9.5(0.375)

    0.43±0_08(0.017±0.003)

    1.2

    1

    25.4(1.000)

    12.7(0.500)

    0.48 土 0.08(0.019 士 0.003)

    1.2

    11/2

    38.1(15.00)

    19.0(0.750)

    0.51 ?.08(0.020 士 0.003)

    1.2

    2

    50.8(2.000)

    25.4(1.000)

    0.58士0.08(0.023 土 0.003)

    1.2



       

Free samples

vulcanized fiberglass tubes Synthetic fiber line tube G5/G9 Tube fiberglass &vulcanized fiber composite tube Filament winding tubes hi-temp & exotic alloys Filament Wound Tubing

Environmental advantage...

Xinrui sourced the best available raw materials, environmental controlled production facilities, and top rated manufacturing technology gave us the leading edge over our competitors. Our clients chooseXinrui products and work with us for a long time. We look for long term working relationship with our clients from the moment you consider our products, or make the first visit to our manufacturing facility, and place your first order with us!

Need help ?

Our Engineers can help you choose the best combination of tubing materials and resin for your specific application etcs contact:sleevecn@gmail.com,
Whatapp:+86-13372140693 ,Skype:zoujq000